Sitemap | RSS | XML
PTFE Tape Filler For Making Spiral Wound Gasket

PTFE Tape Filler For Making Spiral Wound Gasket

PTFE Tape Filler For Making Spiral Wound Gasket​ is made from 100% PTFE with a special process molding. Expanded PTFE tape for making spiral wound gasket can conform to any surface, including rough, pitted, scratched and damaged surfaces. We can supply the common PTFE tape and expanded PTFE tape.

Model:GR102

Send Inquiry

Product Description

PTFE Tape Filler For Making Spiral Wound Gasket



PTFE Tape Filler For Making Spiral Wound Gasket is made from 100% PTFE with a special process molding. Expanded PTFE tape for making spiral wound gasket can conform to any surface, including rough, pitted, scratched and damaged surfaces. We can supply the common PTFE tape and expanded PTFE tape.


Characteristics:

1. Strong, tight seal for any threaded joint, used on oxygen & portable water systems.

2. Widely utilized in construction machinery, chemical industry and other areas, especially in pipe linking systems such as buildings.

3. Excellent characteristics, such as sealing insulativity, acid-resistance and corrosion-resistance.

4. Widely  used under all conditions for a long term.


Temperature: -240 up to 260 deg.C

Pressure: 100 bar

PH valve: 0~14

Density: Expanded PTFE 0.8 (±0.05) g/cm3, PTFE 2.25 (±0.05) g/cm3

Thickness: 0.5-1.0 mm

Width: 5.7-6.0 mm/3.9-4.3 mm is for 4.5/3.2 mm of SWG 




Hot Tags: PTFE Tape Filler For Making Spiral Wound Gasket, Suppliers, Factory, Manufacturers, China

Related Categories

Send Inquiry

Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.